Eurotherm 3216i User Manual download pdf (Page 31)

3200iSeries Indicators

Part No HA029006 Issue 5.0 Sept-12 29

6.5 Access Parameters

The following table summarises the parameters available under the ACCESS list header

The Access List can be selected at any time when in configuration level by holding



key down for 3

seconds, then press

with



still held down.

ACCESS LIST ‘ACCS’

Name Scrolling

Display

Parameter Description Values Allowed Default Access

Level

GOTO GOTO Allows you to change the access level

of the indicator. Passwords prevent

unauthorised change

Lev.1

Operator level 1

Lev.1

Conf

Lev.2

Operator level 2

Lev.3

Operator level 3

Conf

Configuration level

LEV2.P LEVEL 2

PASSCODE

The Level 2 passcode

0-9999

0 = no passcode will be requested

Conf

LEV3.P LEVEL 3

PASSCODE

The Level 3 passcode

Conf

CONF.P CONFIG

PASSCODE

To set a Configuration level passcode

Conf

ID CUSTOMER ID To set the identification of the

indicator

0-9999

Conf

HOME HOME

DISPLAY See

Note 1

To configure the parameters to be

displayed in the HOME display

Process Value – top display

Blank lower display

Std

Conf

aLm

First configured alarm – top

Blank lower display

pV.aL

PV - top display

First configured alarm in lower

section

p.a.ro

PV - top display

First configured alarm read

only in lower section

COLOR SET TOP

DISPLAY

COLOUR

To configure the colour of the top

section of the display

Green

Conf

red

Red

g2R

Green normal. Changes to

red on alarm

K.LOCK KEYBOARD

LOCK

To limit operation of the front panel

buttons when in operator levels.

☺ If ALL has been selected, then to

restore access to the keyboard,

power up the indicator with the



button held down and enter the

configuration level passcode as

described in section 4.1.1. This will

take you to the Quick Code mode.

Press



to EX IT and select YES.

The front panel buttons can then be

operated as normal.

none

Unlocked

none

Conf

ALL

All buttons locked

Edit

Edit keys locked

COLD COLD START

ENABLE/

DISABLE

Use this parameter with care.

When set to yes the indicator will

return to factory settings on the next

power up

Disable

Conf

YES

Enable

PASS.C FEATURE

PASSCODE

To enable chargeable options

Conf

MESG STATIC HOME

MESSAGE

Up to 15 messages can be configured

using iTools configuration software.

This parameter calls up messages 1

to 15.

OFF

The HOME display is

configured according to the

parameter HOME above

Off

Conf

1 to

Message 1

Message 15

The following sections in this handbook describe the parameters associated with each subject. The general format

of these sections is a description of the subject, followed by the table of all parameters to be found in the list,

followed by an example of how to configure or set up parameters.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

Comments to this Manuals

No comments

Eurotherm 3216i User Manual Page 31

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors Eurotherm 3216i