3200
Temperature/Process Controllers
Specification Sheet
Ideal for :
● Plastic extrusion
● Hot runners
● Thermoforming
● Ovens
● Chillers
● Trace heating
● Stress relieving
Features :
● 8 Segment programmer
● Heater failure
detection
● Current monitoring
● Internal timer
● Scrolling text messages
● Recipes
● Modbus comms
● Modbus SP
retransmission
● Analogue
retransmission
● Remote setpoint
● Help text
MODELS
•EUROTHERM FLEXIBLE SOLUTIONS•
The innovative range of 3200 controllers offer precision control of
temperature and other process variables together with a host of advanced
features not normally found in this class of controller.
The emphasis is on ease of use. A simple ‘Quick Start’ code is used to
configure all the functions essential for controlling your process. This
includes input sensor type, measurement range, control options, and
alarms, making ‘Out the Box’ operation truly achievable. In operator mode
every parameter has a scrolling text message describing its function and is
available in English, German, French, Spanish or Italian. More advanced
features are configured using a PC based configuration wizard which is an
easy to use and instructive guide to all the functions in the controller.
Heater Current Monitoring
A current transformer input provides display of the heater current and a
health check on the load. Partial load failure, heater open circuit and SSR
faults are detected and displayed as scrolling alarm messages as well as
providing an alarm output. On the 3208 and 3204 a front panel ammeter
displays the heater current.
Setpoint Programmer
Heat treatment profiles can be programmed using the 8-segment
programmer. Holdback, at the beginning of each segment can be used to
guarantee the soak periods. A digital event output can be triggered in any
segment to initiate actions within the process.
Custom Text Messaging
Custom messages can be created with a PC tool and downloaded to the
3200 to display when an event, alarm or process condition occurs. This
provides the operator with good visibility of the status of the process.
Remote Setpoint
An option exists for the 3200 to have a Remote Analogue Input. This can
be either volts or mA and is used to allow the setpoint to be generated by
a master controller or PLC.
hh