• Temperature indication
• 4-20mA process inputs
• Over-temperature
protection
• Process value trip unit
2132i
2116i
MODELS
Indicator
and Alarm
Units
• Universal input Covers a wide range of temperature and process inputs
• Three alarm setpoints Separate warning and shut-down setpoints
• One or two alarm outputs Alarm alert and shut-down outputs
• Front panel configuration Easy, on-site set-up
• Wide-range 85-264V ac, Can be installed world-wide
or 20-29Vac/dc supply
• Plug-in from front Rapid replacement - reducing downtime
• IP65 and NEMA 4X Can be used in wet and dusty atmospheres
panel sealing
• Meets European EMC Assured reliability in industrial environments
and safety directives
• Three year warranty Low ownership cost
Ideal for:
Features:
Model 2132i
1/32 DIN (48 x 24mm)
Model 2116i
1/16 DIN (48 x 48mm)
Available in compact 1/32 and 1/16 DIN panel sizes, the 2132i and
2116i provide accurate measurement and display of temperature and
other process variables. A universal input allows selection of nine
internally stored thermocouple types. Other input linearisations may
be factory downloaded. Linear 4-20mA inputs can be scaled to the
desired display range. Keylock and passwords prevent unauthorised
access to configuration and alarm settings.
A bright, clear LED display gives good visibility in low and high
ambient lighting.
Three internal setpoints are provided. They operate up to two alarm
outputs which can be configured as latching or non-latching. A
special mode known as ‘alarm blocking’ is available. In this mode,
after power on, the process value must first enter a good state before
the alarm becomes active. This is particularly useful for low alarms
which can be ‘blocked’ while the process is warming-up.
Operation is user friendly with tactile buttons.
Calibration accuracy is maintained with a self-correcting input
circuit. User calibration allows offsets to be applied to compensate
for sensor and other system errors.
Indicator and Alarm Units
Comments to this Manuals